Resource Library

Aeroswift

The South African aviation manufacturing solutions provider Aerosud and the South African Council for Scientific and Industrial Research (CSIR) teamed up to launch a challenging 3D printing project, Aeroswift. Aeroswift collaborated with Altair to...

Customer Stories

GE’s Flow Simulator Increases Lifespan of BHGE’s Gas Turbine

The BHGE Secondary Flow & Heat Transfer team is dedicated to a large variety of analyses in the gas turbine design process. The scope is the estimation of the secondary air requirements for the entire turbine, including rotor, casing, flow path co...

Customer Stories

Providing Designers Easy Access to Powerful Simulation Tools

Brompton Bicycle discuss the benefits they have seen from moving away from simulation in their CAD system to a more powerful and flexible system from Altair.

Customer Testimonials

Minimising Interior Noise in Electric Vehicles

National Electric Vehicle Sweden (NEVS) leverages use of the Altair Squeak and Rattle Director in identifying and minimising risks of interior noise in electric vehicles.

Customer Stories, Videos

Real-Time Foundation Monitoring for Omnifor

In the western part of the Netherlands, the soil has insufficient bearing capacity to allow for the construction of buildings and houses. To overcome this issue, buildings in this area have been built on timber pile foundations. These foundations ...

Customer Stories

Innovative Drone Propulsion Design using Model-Based Development

To assist Kappa Electronics’ customer with controlling the motor for a new drone design, Altair’s solidThinking Embed was used for high speed simulation of motor electronics and control dynamics to develop a novel method of sensorless field-orient...

Customer Stories

Smart City with Pozuelo de Alarcon

The citizens of Pozuelo de Alarcón in Spain wanted a cleaner and more efficient city. The goals were to protect the environment, decrease energy consumption, reduce CO2 emissions, and control expenses.The city council used SmartCore platform to re...

Customer Stories

More Efficient and Economic Injection Mold Tools thanks to Topology Optimization, CFD Simulation and 3D Printing

Toolmaking is usually characterized by cost-intensive, custom made, single-unit production. To create innovative tools, the industry increasingly relies on new manufacturing methods such as 3D printing. To meet market demand, PROTIQ GmbH, a spinof...

Customer Stories

Less Interior Squeak and Rattle Noise Using a Simulation Driven Design Approach

In the development of new vehicles, the PSA Group aimed to detect Squeak and Rattle (S&R) problems before availability of physical testing. This led to a collaboration between PSA’s method development engineering team and Altair’s domain experts.

Customer Stories, Technical Papers

Mando Softtech India Achieves Greater Simulation Accuracy with Altair HyperWorks®

As Manufacturers of Automotive Components such as Chassis and Brakes, Mando Softtech India has to ensure that they maintain highest performance and quality standards of the products they develop. Implementation of Altair HyperWorks solutions has h...

Customer Stories

Developing an Injury Threshold for Human Brain Concussion

Directed by Dr. King Yang, Professor of Bioengineering, the Department’s Bioengineering Center is a leading laboratory focused on research into impact trauma, low back pain, and sports injury biomechanics. For the development of complete understa...

Customer Stories

Wilson Golf

Wilson has a strong relationship with Altair, having worked alongside Altair ProductDesign on a number of successful projects in the past and valuing the broad range of simulation and design technologies available in the HyperWorks and solidThinking software
suites. Altair’s technical and industria

Customer Stories

Mubea Relies on HyperWorks Unlimited™ for Automotive Component Design and Production

In performing lightweighting projects for large OEMs, Mubea is the only provider worldwide who delivers innovations of tailor-rolled blanks (TRB) which are ideal for not only vehicle body structural but also for suspension components that encounte...

Customer Stories

Auburn University applies HyperWorks to Optimize the Design of Composite Suspension Components and Monocoque for a SAE Formula Student Racecar

To optimize the car performance, the Auburn University SAE Racing Team focused on selected components that were most promising in terms of mass reduction with equal or increased stiffness. HyperWorks enabled them to reduce component mass-to-stiffn...

Customer Stories

Gator Motorsports

Gator Motorsports utilized Inspire to redesign its brake pedal, as well as suspension bell cranks. This resulted in increased stiffness and a reduction of weight.

Customer Stories

Top Use Cases: ShipMo3D

Presentation introducing a few of the top use cases for the time and frequency domain analysis software, ShipMo3D.

Customer Stories

Application of FEKO in EM Protection Design for Electromagnetic Effects of Civil Aircraft

In the limited space of a plane, a lot of radio equipment, especially antennas are installed, leading to concerns about antenna pattern distortion caused by the plane body and inter-antenna isolation.

COMAC, Shanghai Aircraft Design and Research Institute continues selecting FEKO to improve the

Customer Stories

Top Use Cases: KTex Family

Presentation introducing a few of the top use cases for the composites software, KTex Family.

Customer Stories

VTT Optimises Industrial Valve Block for Additive Manufacturing

Reprint of the article published on Metal AM - vol. 2 no. 1 Spring 2016

Customer Stories

Korea Meteorological Administration Implements Cost-saving Innovations for Electricity Usage with PBS Professional and AcuSolve

“PBS Professional has been a very reliable workload manager for our large, complex supercomputing systems… Cray and Altair are supercomputing leaders in the weather and climate modeling industry, and we are more than happy to have collaborated for...

Customer Stories

Characterization of Sensorless Motor Control Technology Using VisSim

“A key benefit to using VisSim for this project is its code generation capability and how quickly and fast it works. The speed of how its drivers work and being able to interface directly with our ROM code was really the key enabler for me, and th...

Customer Stories

Optimized Design for 3D Printed Valve Block Sheds Weight, Size and Gains Improved Performance

Not every component or product is suitable
for 3D printing, depending on its size, form
and design as well as the quantity needed.
A valve block is very suitable for 3D printing
and has a high potential for improvement in
weight, performance, and design freedom
when additively manufactured.

Customer Stories

SOGECLAIR Aerospace Employs HyperWorks to Optimize Additively Manufactured Aircraft Components: Topology optimization of a large engine pylon structure

To find new development and manufacturing approach to reduce weight while ensuring safety, HyperWorks offers SOGECLAIR Aerospace an innovative, streamlined development environment with more design freedom, faster development cycles, and lower cost...

Customer Stories

Solid Hex Meshing the Human Lumbar Spine

Computational modeling and simulation, which uses computer-based mathematical techniques, is on the verge of revolutionizing the field of medical devices. Modeling techniques allow computer models to eliminate bad ideas and refine the good ones lo...

Customer Stories

Optimization Technology: Leveraging a Solid Foundation to Innovate Better Products

Steady improvements in the OptiStruct solver platform over 20 years have enabled users to tackle increasingly complex design challenges. Now, OptiStruct in combination with 3D printing helps to achieve more efficient structural designs.

By Uwe Schramm
Concept To Reality Winter/

Customer Stories

EDAG: Developing Commercial Vehicles Inspired by Nature

As Germany's largest independent engineering
partner to the worldwide automotive industry,
EDAG is continuously seeking for new technology and for innovative processes to streamline vehicle development.

Customer Stories

Reducing Weight and Maximising Fuel Efficiency of a Formula Student Car with OptiStruct

Durham University Electric Motorsport (DUEM), are a UK-based team of students who design, build and race electric vehicles. In this project, DUEM wanted to demonstrate how they have applied the latest weight saving technology to achieve a faster, ...

Customer Stories

PBS Professional Drives Computational Science at Scuola Normale

PBS Professional is managing the DreamHPC cluster at Scuola Normale di Pisa, a 2600-core Dell cluster used for compute-intensive simulations requiring parallel efficiency, scalability and fast memory access.

Customer Stories

Toyota Motorsport GmbH uses Altair‘s SAO System to better control software costs in its commercial Software tools

License monitoring delivering information about the actual scope of software usage with Altair’s SAO solution, improving decisions on software renewal and acquisition.

Customer Stories

Dante Sanchez Discusses the Optimization of Mabe's White Goods Packaging

For white goods manufacturer Mabe, the quality of the design and engineering of their home appliances is paramount. The objectives of this project were to simulate the effect of the distribution environment events to a washer and dryer product and...

Customer Testimonials, Videos

Body-In-White Design for a Six-Passenger Sports Car Architecture: Maximizing Body Stiffness and Meeting Strength Requirements Using HyperWorks

The Deep Orange Program has partnered with Altair to apply advanced computational simulation methods to their vehicle designs. Altair-sponsored internships and fellowships have enhanced student learning through
providing webinar-based and on-sight instruction of Altair HyperWorks simulation technol

Customer Stories

Extending Extrusion Die Life Using HyperXtrude

Altair HyperXtrude is used to predict die
performance and run virtual die tryouts.
Using these capabilities, die designs can be
modified and tested to improve the die life
and reduce the number of die trials.

Customer Stories

Mabe - Improved Protection of White Goods through Packaging Optimization

For white goods manufacturer Mabe, the quality of the design and engineering of their home appliances is paramount. The products need to be highly robust as well as visually appealing but must also arrive with the customer in perfect condition. Th...

Customer Stories

Altair SmartSight Turns Utility Operational Data into Valuable Information with Milsoft Visual Analytics

Milsoft Visual Analytics is a powerful business analytics module developed by Altair in partnership with Milsoft Utility Solutions. Through a direct integration of Altair’s SmartSight™ business intelligence software with the Milsoft database schem...

Customer Stories

HyperWorks at B/E Aerospace: Lighter, Safer Seats for Airline Passengers

When you settle in for a flight on a major airline, you are probably in a seat and surrounded
by equipment designed and built by B/E Aerospace. With design and manufacturing facilities
across the globe, B/E Aerospace is the leading manufacturer of cabin interior products
for commercial and privat

Customer Stories

Putting Simulation Muscle Behind a Sporty Concept Car

Optimization technology delivers innovative suspension design for Alfa Romeo's sleek concept car.

Customer Stories

HyperWorks at Wagon Automotive: Speeding Development Time While Cutting Prototype Costs

Wagon Automotive, a system and module supplier of components to major car builders,
sought ways to accelerate product development and reduce prototyping costs while maintaining high quality.
Adopting the HyperWorks suite of advanced CAE tools enabled the company to achieve both those goals.
Wagon

Customer Stories

PBS Professional at Toulouse Genopole

The Toulouse Midi-Pyrénées Genopole, a research program set up in 1999 in southern France by the French Minister of Research, is part of the massive French research initiative known as the National Genopole Network. The genopole name is metaphoric...

Customer Stories

HyperWorks at Sea Ray: Engineering High-Performance Pleasure Boats

For Sea Ray Boats, the leading, U.S.-based manufacturer of high-end pleasure boats, CAE simulations
are an integral part of the design process to achieve shorter time to market. HyperWorks is deployed
for the entire analysis process of the vessel, from modeling and simulation, to visualization and

Customer Stories

PBS Professional at TGen: Cutting Time to Discovery

In recent years, corporations and research institutions around the world have applied massive computational resources to defining the makeup of the human genome. One of the greatest challenges is to translate that knowledge into therapeutics and d...

Customer Stories
375 Results

Be the first to know

Subscribe to our newsletter to learn about product training, news, events, and more!