Altair Monarch Skill Spotlight Series: Advanced Trapping

Advanced Trapping will cover the most difficult to solve challenges when working with semi-structured .txt and .PDF reports. Not every report is neat and formatted enough to allow for standard trapping which is why it’s so important to know the available tools and techniques at your disposal. Mastering Advanced trapping will allow users to address their most difficult challenges when it comes to capturing data on a consistent basis.

Introduction to Altair's Multi-Disciplinary Optimization

MDO Director - Introduction to Altair's Multi-Disciplinary Optimization

Injection Molding Simulation Using Altair Molding Solutions

Injection Molding Simulation Using Altair Molding Solutions

Simulation-Driven Design for Additive Manufacturing

This webinar will take you through the concept and roadmap phase, all the way to the manufacturing process - all within Altair Inspire and Inspire Print 3D, a revolutionary generative design and 3D printing simulation environment that solves real world production challenges. Learn how to rapidly visualize production defects, rectify problems to avoid downstream production issues, save product weight, reduce material consumption and cost all through the use of intelligent complementary design technologies.

Accelerate Product Development Uniquely Combining Antenna Design and Wireless Connectivity Simulation

In this webinar we showcase Altair’s electromagnetic simulation solutions, which uniquely combine antenna design and wireless connectivity for a broad array of communication technologies, including among others, 5G, IoT, WiFi and RFID. As the trusted solution for smart device manufacturers around the world, Altair's electromagnetic solutions shorten development cycles for higher-performing products by accurately simulating the antenna(s) performance within the physical device and at the same time the performance of the device within the wireless network. The same solution at a communication system level is also used by leading organizations to analyze and design wireless networks, including the effect of the antennas, in complex scenarios like indoor, urban and rural

Altair SimLab - Unit System

#1416 Tips and Tricks SimLab 2019.3 version introduces unit system which will allow users to work in a unit system they desire. The introduction of unit system should not disrupt current users from what they are currently used to. The following rules apply for this version.

Altair SimLab - Quick Drop Test Setup

#1417 Tips and Tricks Quick setup - Drop impact test parameters: It will automatically create boundary conditions based on user inputs and user can modify if needed. • Initial velocity will be created based on height, drop direction and gravity. • Rigid wall creation based on direction of impact. • Output request and settings based on solution time after impact.

Quilted Stratum Design: Optimization Software for Preform Tailoring

New composite processes open new degrees of freedom that bridge the step between lay-up optimization and mass production. Design methods must include process constraints and cost evaluation to use at best the composite material and therefore answer to current industrial needs of simultaneous light weighting and cost reduction. In this webinar, you'll learn how Cetim, Onera and Altair have collaborated to propose the QSD method. QSD is a three-step optimization method intended to propose efficient designs with a reduced computational cost. The method is based on a stiffness matching approach. They create an intuitive workflow in HyperMesh environment that lead the designer to a smart composite design, with adapted fiber orientation and reduced material scraps thanks to draping analysis.

Altair Monarch Skill Spotlight Series: Basic Trapping

In the Basic Trapping session, we covered the most straightforward challenges when working with semi-structured .txt and .PDF reports. For the documents that follow consistent structure throughout the entirety of the report, standard trapping methods will offer a reliable and repeatable solution. Mastering Basic Trapping methods will allow the end-user to address all of their basic challenges when it comes to capturing data on a consistent basis.

Prediction of the Vibration Behavior of Short-Fiber Reinforced Engine Brackets

In this webinar, a procedure for the prediction of the vibration behavior of short fiber reinforced structural components considering the anisotropic material properties is presented. The fiber orientation is determined by an injection molding simulation and transferred to the structural mechanics model. The determination of the anisotropic stiffness characteristics of the composite material is based on a multiscale material model. The identification of the parameters of the material model is carried out by comparison with resonance measurements on simple bending bars. As an example, results for an engine bracket are presented. Due to the comparatively simple application and scalability of the procedure, high-performance computations can also be conducted for large models.

Process Simulation of Parts Made with Complex Fabrics

This webinar demonstrates how KTex tools available through the Altair Partner Alliance, can help predict the mechanical behavior of structural parts made with complex fabrics, taking in to account their manufacturing process. Webinar highlights:

• Easy model-building of complex fabrics and stacks
• High precision simulation of the lay-up process
• Minimize fabric and part testing
• Predictive simulation of the fibers movement
• Complete customizability of the composite stack and the manufactured part

Webinar - Leverage HPC with Altair Access when WFH - Run, Visualize and Manage files

Leverage HPC with Altair Access when WFH - Run, Visualize and Manage files

Training - Machine Learning Techniques for CAE Applications using Altair Data Analytics

Machine learning techniques for CAE applications using Altair Data Analytics software.

Alsim MERGE - AutoMERGE Workflow

Creating an Alsim or Basis Surface Mesh making the model watertight is an automated process in MERGE. This video shows the steps the user has to follow starting from importing a CATIA model to generate the merged output.

Retaining High Value For Your Business Using Data Analytics

A profound shift in the world economy means that businesses will rely more on analytics to predict a behavior down to a particular confidence interval. Loss of revenue streams and mitigating other risks highlights the importance of using data to drive decisions around strategies that are intended to maintain revenue, reduce costs, and navigate through other challenges.

Using Altair Data Analytics To Track Down Fraudulent Activities

Altair Data Analytics helps the Intelligence Community implement and streamline advanced interoperability through smart data preparation and predictive analytics, allowing security analysts to rapidly access, clean, and transform difficult data from disparate sources into a leverageable, shared asset for efficient reporting. During the 20-minute session presented at the recently-held Intelligence Analytics Virtual Summit, we discussed how to leverage data preparation and predictive analytics to automate repetitive, error-prone processes associated with accessing and reconciling data, eliminating manual work, and fostering smart decision-making across the board.

Data Preparation, Data Science and Machine Learning

This video explores the many ways Altair Data Analytics software may be applied in financial services environments. Learn how to improve your skills in data preparation, machine learning, and data visualization.

Stream Processing and Visualization

Learn how you apply real-time data visualization and stream processing technology in financial services environments to identify profitable opportunities and avoid compliance risks.

1D-3D Co-Simulation Of Multi Body Systems Using Activate-MotionSolve

1D-3D Co-Simulation Of Multi Body Systems Using Activate-MotionSolve

Automation of Model Build Process using SimLab

Automation of model build process using SimLab

HyperMesh & OptiStruct - Composite Design and Analysis

Composite Design and Analysis Using HyperMesh-OptiStruct

Training - Structural Analysis for Rapid Design Iterations using Altair SIMSOLID

Structural Analysis for Rapid Design Iterations using Altair SIMSOLID

Altair Panopticon 2020.0: An Introduction

With Panopticon 2020.0, we have moved to a fully cloud-compatible server-based platform. All functions of the system are handled by the server and are compatible with Linux, Mac, and Windows desktop machines. Panopticon 2020’s new server-side content repository architecture enables automatic sharing of content between servers in multi-server implementations. The platform’s improved user session management tools give admins complete visibility into system utilization, and it now supports Python integration with Apache Arrow serialization. This short video provides a quick overview of the new capabilities of the Panopticon 2020.0 release.

Training - Lead Time reduction in report generation using HyperView Report

This session explains how HyperView Report tool can be helpful in standardization and reducing lead time in report creation.

Efficiently Simulating and Optimising Antenna Placement in Virtual Test Scenarios

In this practical workshop we will present both the theory and background of the numerical techniques used, as well as presenting application examples and real-world cases studies on how such a process is used in the industry today. It will be a combination of presentation and demonstration of the best insight in the process. Due to increasing complexity and a higher demand for connectivity for all sorts of products, physical measurements are more and more enhanced by virtual testing, not only on component level but also for full platforms like vehicles, aircrafts, etc. in their environment. Simulation in the design stage is crucial for successful deployment. This workshop demonstrates the development process, from antenna evaluation to placing the antenna concepts on a platform and performing the virtual test drive / flight analysis also using optimization to increase the performance of the system. The numerical methods applied for such types of analysis,like full wave solutions for the antenna design and placement, as well as different wave propagation models like empirical models or dominant path solutions will also be discussed in more detail. Application examples from the automotive and aerospace domain will show time variant results for antenna systems on moving objects e.g. also for MIMO scenarios.

Training- Aero Modelling Tools In HyperWorks

The Aero Utility tools available under User Profile>Engineering Tools>Aerospace options enables Aerospace engineers with unique modelling capabilties required in building Aero models. In this Webinar, we will explore a few of those utilities viz Airframe meshing, Composites Material Orientations, Compare FE contents and so on.

Training- Improve CFD Pre-Processing Using HyperMesh : SimLab

This is an introductory course for using HyperMesh CFD to create and set up finite element (CFD) models for CFD analysis. A combination of lectures and exercises will familiarize students with the HyperMesh environment, process, and suite of tools needed to start using HyperMesh in their work.

Training- Post Processing For NVH - HyperView:NVD

Post Processing For NVH - HyperView:NVD

HyperView - Post Processing for Crash

Post Processing for Crash - HyperView

Advanced CAE Post Processing Using Altair Compose

This session focuses primarily to illustrate how Altair Compose can act as a catalyst in CAE simulations, especially in post-processing aspects. Cases are demonstrated in Compose using its built-in capabilities like CAE readers, optimization, advanced math based scripting, signal processing, plotting/ visualization and many more to understand how Compose benefits the CAE simulations.

Training: Complex Feature Based Meshing of Solids With SimLab

This session deals on how to simplify the modelling process of complex geometries using SimLab automated meshing. This course would include SimLab capabilities of meshing and how to standardize the workflow of meshing complex geomentries using repeatable mesh templates.

Training: Model Design Variations In Mesh Morphing Using HyperWorks New User Experience

The tool allows you to alter finite element models while keeping mesh distortions to a minimum. HyperMorph can be used to: • Change the profile and the dimensions of your mesh • Map an existing mesh onto a new geometry, and • Create shape variables that can be used for optimization

Using HyperStudy with a remote HPC infrastructure via Altair Access

Altair HyperStudy is a design exploration tool that manages simulation model variability, run submission and extracts simulation responses. HyperStudy allows to seamlessly perform Design of experiments, generate metamodels and perform optimizations and reliability studies. However, some simulations are computationally expensive to run in local machines. Altair Access can assist to submit the jobs to a remote HPC server seamlessly, with the reduced simulation time and increased compliance with IT policies.

Solve Your EMC/EMI Problems Involving Cables

Many problems of electromagnetic compatibility and interference involve cables, which either radiate through imperfect shields and cause coupling into other cables, devices or antennas, or which receive (irradiation) external electromagnetic fields (radiated from antennas or leaked through other devices) and then cause disturbance voltages and currents potentially resulting in a malfunctioning system. Altair offers a comprehensive combined electromagnetic field and cable solution using the Multiconductor Transmission Line (MTL) method, as well as a hybrid solution combining MTL with Method of Moments (MoM+MTL), to solve the EMC/EMI problems involving cables. This webinar covers the cable analysis solution from Altair with a detailed overview of the methodology with examples.

Training- Part Browser For Common Model Build Using HyperWorks New User Experience

The process would help Engineers to build and manage detailed FE models for multiple domains which involves part level model building and assembly, representation and configuration management. The structure can be shared easily with PLM, PDM or CAD systems.

Direct Mid Meshing forTraining: Complex 2D Components Using HyperWorks New User Experience

The session will take you through the new workflow introduced to HyperMesh enables efficient mesh generation of thin solid parts without the need to create a mid-surface. The thickness of the original part can be mapped automatically on to the resulting mesh.

CAD & CAE Model Verification Tools Using HyperWorks New User Experience

This tool allows engineering analysts to validate CAD models received from the design teams, automatically identifying potential issues that could slow down the pre-processing stage of the simulation life cycle. The solution identifies part intersections, missing welds and incorrect bolt-nut positions on an entire assembly structure and generates comprehensive reports.

Inspire 2019 Introduction

In this course, you will have the opportunity to learn about the Inspire 2019 interface along with tools and workflows contained within Inspire. Modules contained within the course provide detailed descriptions of the tools and workflows within Inspire. You will also have the opportunity to watch and perform hands-on exercises within each module.

Accelerate Decision-Making with GPUs

Harnessing the computational capabilities of the graphics processing unit (GPU) is one of the cornerstones of Altair's mission to empower its customers. First and foremost, utilizing GPUs to accelerate numerical simulation delivers significant increases in speed and therefore, throughput. That means more opportunities to explore and fine-tune designs, faster decision-making based on more accurate results, and consequently the prospect of considerable reductions in time to market. In addition, creativity is enhanced, with more vivid, realistic and accurate rendering and visualization put within easier reach.

Altair SimLab – CAD Shared Faces

Tips and Tricks This tool will help to show the shared faces in connected CAD body. This feature is supported only for Parasolid model imported with “Save geometry in database”.

Altair SimLab – Proximity Mesh Control

Proximity: Automatic mesh refinement will happen on surfaces that are within proximity distance. This will be useful in CFD, Electronics applications etc.

Altair SimLab – Extract Cavity

Extract cavity option to extract the cavity from the selected bodies by defining the node. To capture the fluid geometry better, turn on ‘Preserve all feature lines’ in Advanced options. It would be useful in CFD to extract the fluid domain.

Attaining Nonlinear and Multiphysics Mastery for SMBs with SimLab and OptiStruct

A growing number of companies aspire to perform multiphysics, but each added analysis tool introduces new complexity to a development process. Model translation, remeshing, design modification – these tasks offer no added value and increase the likelihood of error. Altair SimLab enables users to model and solve multiple physics, including nonlinear analysis, within one unified platform. Each analysis runs from one master model, allowing you to spend less time prepping and more time solving. Join the webinar to see these powerful workflows in action. In this webinar, we will demo the design of a smart speaker with an emphasis on nonlinear analysis, multiphysics, and improving perceived sound with vibro-acoustic simulation.

Reduce PCB Design Reviews From Design to Manufacturing

In this webinar we showcase Altair Pollex - a comprehensive EDA software solution that is based on an easy-to-use collaborative application, with unsurpassed connectivity to all the major ECAD solutions. Pollex is already the trusted go-to solution for many key global players such as Samsung, LG and Qualcomm - enabling them to quickly visualize and review PCB designs, and ultimately go to market faster. Pollex also provides a powerful and reliable solution to detect design faults in the early development stages that could cause electrical failures or occur during the manufacturing and assembly of PCBs.

Real-Time Risk Monitoring in Electronic Trading Environments

On the buy-side, risk monitoring helps portfolio managers formulate new strategies for assessing performance. On the sell-side, the same tools enable traders and managers to monitor and analyze all aspects of risk throughout the trading day. Regardless of which asset classes are being traded, the ability to monitor risk on a real-time basis is revolutionizing how risk compliance is accomplished at top tier financial institutions around the world. In this webinar, we discuss the benefits of analyzing intraday trading risk, the downsides of waiting for end-of-day reports, and the challenges associated with building and using risk compliance dashboards that traders and compliance managers can use effectively to inform trading decisions. We also demonstrate methods for code-free development of sophisticated risk analytics systems that can be customized to fit the unique requirements of a firm, desk, or trader.

Real-Time Risk Monitoring in Electronic Trading Environments

On the buy-side, risk monitoring helps portfolio managers formulate new strategies for assessing performance. On the sell-side, the same tools enable traders and managers to monitor and analyze all aspects of risk throughout the trading day. Regardless of which asset classes are being traded, the ability to monitor risk on a real-time basis is revolutionizing how risk compliance is accomplished at top tier financial institutions around the world. In this webinar, we discuss the benefits of analyzing intraday trading risk, the downsides of waiting for end-of-day reports, and the challenges associated with building and using risk compliance dashboards that traders and compliance managers can use effectively to inform trading decisions. We also demonstrate methods for code-free development of sophisticated risk analytics systems that can be customized to fit the unique requirements of a firm, desk, or trader.

Get One Step Ahead of 5G With Wireless Network Planning and Performance Analysis

5G is the next evolution of communication networks. With an exponential increase in consumer demands for high-speed data, the existing technologies can only sustain this demand for the next few years. We need a new technology with new capabilities, improved downloading and uploading speeds, and that can enable companies to control devices remotely in much more efficient and faster way than currently possible. This webinar presents Altair’s advanced computational tools for the propagation analysis and network planning of the emerging 5G technologies.

SimSolid 2019.5 Introduction

In this course you will have the opportunity to learn about the capabilities contained within SimSolid. Modules contained within the course provide detailed descriptions of the tools and workflows within SimSolid. You will also have the opportunity to watch and perform hands on exercises throughout the modules.